: Cloven hooves. i first took a 4X4 and cut two chunks that are 6 inches long [the length of teh bottom of my shoe plus an inch]. start Air Jordan 4s by cutting the top of the shoe open, to make the bottom inside available. i like the wood grain in there. then .i first took a 4X4 and cut two chunks that are 6 inches long Air Jordan 17s [the length of teh bottom of my shoe plus an inch].next i cut some Jordan 13 Retro of the bulk Air Jordan 16s off Air Jordan Fusion 4 with the circular saw, making the basic shape for my hooves.then sand the corners to a rounded awesomeness.next i took the peices and cut a split down the middle of each, then sanded that out a little.the only regrets i have with these is that they are a bit blocky, but i really dont mind because its easier to balace this way, and the hooves will be covered about 2/3 of the way down with fur from my pants.